t.m.g.GladeReactor(sup) : class documentation

Part of twisted.manhole.gladereactor View Source View In Hierarchy

GTK+-2 event loop reactor with GUI.
Method listenTCP Undocumented
Method connectTCP Undocumented
Method listenSSL Connects a given protocol factory to the given numeric TCP/IP port. The connection is a SSL one, using contexts created by the context factory.
Method connectSSL Connect a client Protocol to a remote SSL socket.
Method connectUNIX Connect a client protocol to a UNIX socket.
Method listenUNIX Listen on a UNIX socket.
Method on_disconnect_clicked Undocumented
Method on_viewlog_clicked Undocumented
Method on_inspect_clicked Undocumented
Method on_suspend_clicked Undocumented
Method toggle_suspend Undocumented
Method servers_selection_changed Undocumented
Method on_quit_clicked Undocumented
Method __init__ Undocumented
Method addReader Add a FileDescriptor for monitoring of data available to read.
Method addWriter Add a FileDescriptor for monitoring ability to write data.
Method removeReader Stop monitoring the given FileDescriptor for reading.
Method removeWriter Stop monitoring the given FileDescriptor for writing.
Method crash Crash the reactor.
Method run Run the reactor.
Method _goAway Undocumented
Method _maybeAddServer Undocumented

Inherited from GlibReactorBase (via Gtk2Reactor):

Method input_add Undocumented
Method getReaders Retrieve the list of current FileDescriptor monitored for reading.
Method getWriters Retrieve the list of current FileDescriptor monitored for writing.
Method removeAll Remove monitoring for all registered FileDescriptors.
Method iterate One iteration of the event loop, for trial's use.
Method stop Stop the reactor.
Method callLater Schedule a DelayedCall.
Instance Variable _sources A dictionary mapping FileDescriptor instances to GSource handles.
Instance Variable _reads A set of FileDescriptor instances currently monitored for reading.
Instance Variable _writes A set of FileDescriptor instances currently monitored for writing.
Instance Variable _simtag A GSource handle for the next simulate call.
Method _handleSignals Extend the basic signal handling logic to also support handling SIGCHLD to know when to try to reap child processes.
Method _ioEventCallback Called by event loop when an I/O event occurs.
Method _add No summary
Method _remove Remove monitoring the given FileDescriptor for either reading or writing. If it's still monitored for the other operation, we re-register the FileDescriptor for only that operation.
Method _reschedule Schedule a glib timeout for _simulate.
Method _simulate Run timers, and then reschedule glib timeout for next scheduled event.

Inherited from PosixReactorBase (via Gtk2Reactor, GlibReactorBase):

Method installWaker Install a `waker' to allow threads and signals to wake up the IO thread.
Method spawnProcess Spawn a process, with a process protocol.
Method listenUDP Connects a given DatagramProtocol to the given numeric UDP port.
Method listenMulticast Connects a given DatagramProtocol to the given numeric UDP port.
Method listenUNIXDatagram Connects a given DatagramProtocol to the given path.
Method connectUNIXDatagram Connects a ConnectedDatagramProtocol instance to a path.
Method adoptStreamPort Create a new IListeningPort from an already-initialized socket.
Method adoptStreamConnection
Method adoptDatagramPort Add an existing listening SOCK_DGRAM socket to the reactor to monitor for read and write readiness.
Instance Variable _childWaker None or a reference to the _SIGCHLDWaker which is used to properly notice child process termination.
Method _uninstallHandler If a child waker was created and installed, uninstall it now.
Method _removeAll Remove all readers and writers, and list of removed IReadDescriptors and IWriteDescriptors.

Inherited from _SignalReactorMixin (via Gtk2Reactor, GlibReactorBase, PosixReactorBase):

Method startRunning Extend the base implementation in order to remember whether signal handlers should be installed later.
Method mainLoop Undocumented
Instance Variable _installSignalHandlers A flag which indicates whether any signal handlers will be installed during startup. This includes handlers for SIGCHLD to monitor child processes, and SIGINT, SIGTERM, and SIGBREAK to stop the reactor. (type: bool)
Method _reallyStartRunning Extend the base implementation by also installing signal handlers, if self._installSignalHandlers is true.

Inherited from _DisconnectSelectableMixin (via Gtk2Reactor, GlibReactorBase, PosixReactorBase):

Method _disconnectSelectable Utility function for disconnecting a selectable.

Inherited from ReactorBase (via Gtk2Reactor, GlibReactorBase, PosixReactorBase):

Instance Variable running See IReactorCore.running
Method installResolver Undocumented
Method wakeUp Wake up the event loop.
Method doIteration Do one iteration over the readers and writers which have been added.
Method resolve Return a Deferred that will resolve a hostname.
Method sigInt Handle a SIGINT interrupt.
Method sigBreak Handle a SIGBREAK interrupt.
Method sigTerm Handle a SIGTERM interrupt.
Method disconnectAll Disconnect every reader, and writer in the system.
Method fireSystemEvent See twisted.internet.interfaces.IReactorCore.fireSystemEvent.
Method addSystemEventTrigger See twisted.internet.interfaces.IReactorCore.addSystemEventTrigger.
Method removeSystemEventTrigger See twisted.internet.interfaces.IReactorCore.removeSystemEventTrigger.
Method callWhenRunning See twisted.internet.interfaces.IReactorCore.callWhenRunning.
Method startRunning Method called when reactor starts: do some initialization and fire startup events.
Method getDelayedCalls No summary
Method timeout Determine the longest time the reactor may sleep (waiting on I/O notification, perhaps) before it must wake up to service a time-related event.
Method runUntilCurrent Run all pending timed calls.
Method callFromThread 0 See twisted.internet.interfaces.IReactorThreads.callFromThread.
Method getThreadPool See twisted.internet.interfaces.IReactorThreads.getThreadPool.
Method callInThread See twisted.internet.interfaces.IReactorThreads.callInThread.
Method suggestThreadPoolSize See twisted.internet.interfaces.IReactorThreads.suggestThreadPoolSize.
Method callFromThread Cause a function to be executed by the reactor thread.
Instance Variable _stopped A flag which is true between paired calls to reactor.run and reactor.stop. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _justStopped A flag which is true between the time reactor.stop is called and the time the shutdown system event is fired. This is used to determine whether that event should be fired after each iteration through the mainloop. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _started A flag which is true from the time reactor.run is called until the time reactor.run returns. This is used to prevent calls to reactor.run on a running reactor. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _registerAsIOThread A flag controlling whether the reactor will register the thread it is running in as the I/O thread when it starts. If True, registration will be done, otherwise it will not be.
Method _reallyStartRunning Method called to transition to the running state. This should happen in the during startup event trigger phase.
Method _moveCallLaterSooner Undocumented
Method _cancelCallLater Undocumented
Method _insertNewDelayedCalls Undocumented
Method _checkProcessArgs Check for valid arguments and environment to spawnProcess.
Method _initThreads Undocumented
Method _initThreadPool Create the threadpool accessible with callFromThread.
Method _stopThreadPool No summary

Inherited from _PollLikeMixin (via Gtk2Reactor, GlibReactorBase):

Method _doReadOrWrite fd is available for read or write, do the work and raise errors if necessary.
def listenTCP(self, port, factory, backlog=50, interface=''): (source)
Undocumented
def connectTCP(self, host, port, factory, timeout=30, bindAddress=None): (source)
Undocumented
def listenSSL(self, port, factory, contextFactory, backlog=50, interface=''): (source)
Connects a given protocol factory to the given numeric TCP/IP port. The connection is a SSL one, using contexts created by the context factory.
Parametersporta port number on which to listen
factorya twisted.internet.protocol.ServerFactory instance
contextFactorya twisted.internet.ssl.ContextFactory instance
backlogsize of the listen queue
interfacethe hostname to bind to, defaults to '' (all)
def connectSSL(self, host, port, factory, contextFactory, timeout=30, bindAddress=None): (source)
Connect a client Protocol to a remote SSL socket.
Parametershosta host name
porta port number
factorya twisted.internet.protocol.ClientFactory instance
contextFactorya twisted.internet.ssl.ClientContextFactory object.
timeoutnumber of seconds to wait before assuming the connection has failed.
bindAddressa (host, port) tuple of local address to bind to, or None.
ReturnsAn object which provides IConnector.
def connectUNIX(self, address, factory, timeout=30): (source)
Connect a client protocol to a UNIX socket.
Parametersaddressa path to a unix socket on the filesystem.
factorya twisted.internet.protocol.ClientFactory instance
timeoutnumber of seconds to wait before assuming the connection has failed.
checkPIDif True, check for a pid file to verify that a server is listening. If address is a Linux abstract namespace path, this must be False.
ReturnsAn object which provides IConnector.
def listenUNIX(self, address, factory, backlog=50, mode=438): (source)
Listen on a UNIX socket.
Parametersaddressa path to a unix socket on the filesystem.
factorya twisted.internet.protocol.Factory instance.
backlognumber of connections to allow in backlog.
modeThe mode (not umask) to set on the unix socket. See platform specific documentation for information about how this might affect connection attempts. (type: int)
wantPIDif True, create a pidfile for the socket. If address is a Linux abstract namespace path, this must be False.
ReturnsAn object which provides IListeningPort.
def on_disconnect_clicked(self, w): (source)
Undocumented
def on_viewlog_clicked(self, w): (source)
Undocumented
def on_inspect_clicked(self, w): (source)
Undocumented
def on_suspend_clicked(self, w): (source)
Undocumented
def toggle_suspend(self, suspending=0): (source)
Undocumented
def servers_selection_changed(self, w): (source)
Undocumented
def on_quit_clicked(self, w): (source)
Undocumented
def __init__(self): (source)
Undocumented
def addReader(self, reader): (source)
Add a FileDescriptor for monitoring of data available to read.
def _goAway(self, reader): (source)
Undocumented
def _maybeAddServer(self, reader, read=0, write=0): (source)
Undocumented
def addWriter(self, writer): (source)
Add a FileDescriptor for monitoring ability to write data.
def removeReader(self, reader): (source)
Stop monitoring the given FileDescriptor for reading.
def removeWriter(self, writer): (source)
Stop monitoring the given FileDescriptor for writing.
def crash(self): (source)
Crash the reactor.
def run(self, installSignalHandlers=1): (source)
Run the reactor.
API Documentation for Twisted, generated by pydoctor at 2014-05-12 18:27:00.