Implements interfaces: twisted.internet.interfaces.IReactorFDSet

Reactor running on top of asyncio.SelectorEventLoop.

Method __init__ Undocumented
Method addReader I add reader to the set of file descriptors to get read events for.
Method addWriter I add writer to the set of file descriptors to get write events for.
Method removeReader Removes an object previously added with addReader.
Method removeWriter Removes an object previously added with addWriter.
Method removeAll Remove all readers and writers.
Method getReaders Return the list of file descriptors currently monitored for input events by the reactor.
Method getWriters Return the list file descriptors currently monitored for output events by the reactor.
Method getDelayedCalls No summary
Method iterate See twisted.internet.interfaces.IReactorCore.iterate.
Method run Fire 'startup' System Events, move the reactor to the 'running' state, then run the main loop until it is stopped with stop() or crash().
Method stop See twisted.internet.interfaces.IReactorCore.stop.
Method crash See twisted.internet.interfaces.IReactorCore.crash.
Method seconds Get the current time in seconds.
Method callLater See twisted.internet.interfaces.IReactorTime.callLater.
Method callFromThread Cause a function to be executed by the reactor thread.
Method _unregisterFDInAsyncio Compensate for a bug in asyncio where it will not unregister a FD that it cannot handle in the epoll loop. It touches internal asyncio code.
Method _readOrWrite Undocumented

Inherited from ReactorBase (via PosixReactorBase):

Instance Variable running See IReactorCore.running
Method installResolver See IReactorPluggableResolver.
Method installNameResolver See IReactorPluggableNameResolver.
Method nameResolver Implementation of read-only IReactorPluggableNameResolver.nameResolver.
Method wakeUp Wake up the event loop.
Method doIteration Do one iteration over the readers and writers which have been added.
Method resolve Return a Deferred that will resolve a hostname.
Method sigInt Handle a SIGINT interrupt.
Method sigBreak Handle a SIGBREAK interrupt.
Method sigTerm Handle a SIGTERM interrupt.
Method disconnectAll Disconnect every reader, and writer in the system.
Method fireSystemEvent See twisted.internet.interfaces.IReactorCore.fireSystemEvent.
Method addSystemEventTrigger See twisted.internet.interfaces.IReactorCore.addSystemEventTrigger.
Method removeSystemEventTrigger See twisted.internet.interfaces.IReactorCore.removeSystemEventTrigger.
Method callWhenRunning See twisted.internet.interfaces.IReactorCore.callWhenRunning.
Method startRunning Method called when reactor starts: do some initialization and fire startup events.
Method timeout Determine the longest time the reactor may sleep (waiting on I/O notification, perhaps) before it must wake up to service a time-related event.
Method runUntilCurrent Run all pending timed calls.
Method callFromThread 0 See twisted.internet.interfaces.IReactorFromThreads.callFromThread.
Method getThreadPool See twisted.internet.interfaces.IReactorThreads.getThreadPool.
Method callInThread See twisted.internet.interfaces.IReactorInThreads.callInThread.
Method suggestThreadPoolSize See twisted.internet.interfaces.IReactorThreads.suggestThreadPoolSize.
Instance Variable _stopped A flag which is true between paired calls to reactor.run and reactor.stop. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _justStopped A flag which is true between the time reactor.stop is called and the time the shutdown system event is fired. This is used to determine whether that event should be fired after each iteration through the mainloop. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _started A flag which is true from the time reactor.run is called until the time reactor.run returns. This is used to prevent calls to reactor.run on a running reactor. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _registerAsIOThread A flag controlling whether the reactor will register the thread it is running in as the I/O thread when it starts. If True, registration will be done, otherwise it will not be.
Method _reallyStartRunning Method called to transition to the running state. This should happen in the during startup event trigger phase.
Method _moveCallLaterSooner Undocumented
Method _cancelCallLater Undocumented
Method _insertNewDelayedCalls Undocumented
Method _checkProcessArgs Check for valid arguments and environment to spawnProcess.
Method _initThreads Undocumented
Method _initThreadPool Create the threadpool accessible with callFromThread.
Method _stopThreadPool No summary

Inherited from ReactorBase (via PosixReactorBase):

Instance Variable running See IReactorCore.running
Method installResolver See IReactorPluggableResolver.
Method installNameResolver See IReactorPluggableNameResolver.
Method nameResolver Implementation of read-only IReactorPluggableNameResolver.nameResolver.
Method wakeUp Wake up the event loop.
Method doIteration Do one iteration over the readers and writers which have been added.
Method resolve Return a Deferred that will resolve a hostname.
Method sigInt Handle a SIGINT interrupt.
Method sigBreak Handle a SIGBREAK interrupt.
Method sigTerm Handle a SIGTERM interrupt.
Method disconnectAll Disconnect every reader, and writer in the system.
Method fireSystemEvent See twisted.internet.interfaces.IReactorCore.fireSystemEvent.
Method addSystemEventTrigger See twisted.internet.interfaces.IReactorCore.addSystemEventTrigger.
Method removeSystemEventTrigger See twisted.internet.interfaces.IReactorCore.removeSystemEventTrigger.
Method callWhenRunning See twisted.internet.interfaces.IReactorCore.callWhenRunning.
Method startRunning Method called when reactor starts: do some initialization and fire startup events.
Method timeout Determine the longest time the reactor may sleep (waiting on I/O notification, perhaps) before it must wake up to service a time-related event.
Method runUntilCurrent Run all pending timed calls.
Method callFromThread 0 See twisted.internet.interfaces.IReactorFromThreads.callFromThread.
Method getThreadPool See twisted.internet.interfaces.IReactorThreads.getThreadPool.
Method callInThread See twisted.internet.interfaces.IReactorInThreads.callInThread.
Method suggestThreadPoolSize See twisted.internet.interfaces.IReactorThreads.suggestThreadPoolSize.
Instance Variable _stopped A flag which is true between paired calls to reactor.run and reactor.stop. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _justStopped A flag which is true between the time reactor.stop is called and the time the shutdown system event is fired. This is used to determine whether that event should be fired after each iteration through the mainloop. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _started A flag which is true from the time reactor.run is called until the time reactor.run returns. This is used to prevent calls to reactor.run on a running reactor. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _registerAsIOThread A flag controlling whether the reactor will register the thread it is running in as the I/O thread when it starts. If True, registration will be done, otherwise it will not be.
Method _reallyStartRunning Method called to transition to the running state. This should happen in the during startup event trigger phase.
Method _moveCallLaterSooner Undocumented
Method _cancelCallLater Undocumented
Method _insertNewDelayedCalls Undocumented
Method _checkProcessArgs Check for valid arguments and environment to spawnProcess.
Method _initThreads Undocumented
Method _initThreadPool Create the threadpool accessible with callFromThread.
Method _stopThreadPool No summary

Inherited from ReactorBase (via PosixReactorBase):

Instance Variable running See IReactorCore.running
Method installResolver See IReactorPluggableResolver.
Method installNameResolver See IReactorPluggableNameResolver.
Method nameResolver Implementation of read-only IReactorPluggableNameResolver.nameResolver.
Method wakeUp Wake up the event loop.
Method doIteration Do one iteration over the readers and writers which have been added.
Method resolve Return a Deferred that will resolve a hostname.
Method sigInt Handle a SIGINT interrupt.
Method sigBreak Handle a SIGBREAK interrupt.
Method sigTerm Handle a SIGTERM interrupt.
Method disconnectAll Disconnect every reader, and writer in the system.
Method fireSystemEvent See twisted.internet.interfaces.IReactorCore.fireSystemEvent.
Method addSystemEventTrigger See twisted.internet.interfaces.IReactorCore.addSystemEventTrigger.
Method removeSystemEventTrigger See twisted.internet.interfaces.IReactorCore.removeSystemEventTrigger.
Method callWhenRunning See twisted.internet.interfaces.IReactorCore.callWhenRunning.
Method startRunning Method called when reactor starts: do some initialization and fire startup events.
Method timeout Determine the longest time the reactor may sleep (waiting on I/O notification, perhaps) before it must wake up to service a time-related event.
Method runUntilCurrent Run all pending timed calls.
Method callFromThread 0 See twisted.internet.interfaces.IReactorFromThreads.callFromThread.
Method getThreadPool See twisted.internet.interfaces.IReactorThreads.getThreadPool.
Method callInThread See twisted.internet.interfaces.IReactorInThreads.callInThread.
Method suggestThreadPoolSize See twisted.internet.interfaces.IReactorThreads.suggestThreadPoolSize.
Instance Variable _stopped A flag which is true between paired calls to reactor.run and reactor.stop. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _justStopped A flag which is true between the time reactor.stop is called and the time the shutdown system event is fired. This is used to determine whether that event should be fired after each iteration through the mainloop. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _started A flag which is true from the time reactor.run is called until the time reactor.run returns. This is used to prevent calls to reactor.run on a running reactor. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _registerAsIOThread A flag controlling whether the reactor will register the thread it is running in as the I/O thread when it starts. If True, registration will be done, otherwise it will not be.
Method _reallyStartRunning Method called to transition to the running state. This should happen in the during startup event trigger phase.
Method _moveCallLaterSooner Undocumented
Method _cancelCallLater Undocumented
Method _insertNewDelayedCalls Undocumented
Method _checkProcessArgs Check for valid arguments and environment to spawnProcess.
Method _initThreads Undocumented
Method _initThreadPool Create the threadpool accessible with callFromThread.
Method _stopThreadPool No summary

Inherited from ReactorBase (via PosixReactorBase):

Instance Variable running See IReactorCore.running
Method installResolver See IReactorPluggableResolver.
Method installNameResolver See IReactorPluggableNameResolver.
Method nameResolver Implementation of read-only IReactorPluggableNameResolver.nameResolver.
Method wakeUp Wake up the event loop.
Method doIteration Do one iteration over the readers and writers which have been added.
Method resolve Return a Deferred that will resolve a hostname.
Method sigInt Handle a SIGINT interrupt.
Method sigBreak Handle a SIGBREAK interrupt.
Method sigTerm Handle a SIGTERM interrupt.
Method disconnectAll Disconnect every reader, and writer in the system.
Method fireSystemEvent See twisted.internet.interfaces.IReactorCore.fireSystemEvent.
Method addSystemEventTrigger See twisted.internet.interfaces.IReactorCore.addSystemEventTrigger.
Method removeSystemEventTrigger See twisted.internet.interfaces.IReactorCore.removeSystemEventTrigger.
Method callWhenRunning See twisted.internet.interfaces.IReactorCore.callWhenRunning.
Method startRunning Method called when reactor starts: do some initialization and fire startup events.
Method timeout Determine the longest time the reactor may sleep (waiting on I/O notification, perhaps) before it must wake up to service a time-related event.
Method runUntilCurrent Run all pending timed calls.
Method callFromThread 0 See twisted.internet.interfaces.IReactorFromThreads.callFromThread.
Method getThreadPool See twisted.internet.interfaces.IReactorThreads.getThreadPool.
Method callInThread See twisted.internet.interfaces.IReactorInThreads.callInThread.
Method suggestThreadPoolSize See twisted.internet.interfaces.IReactorThreads.suggestThreadPoolSize.
Instance Variable _stopped A flag which is true between paired calls to reactor.run and reactor.stop. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _justStopped A flag which is true between the time reactor.stop is called and the time the shutdown system event is fired. This is used to determine whether that event should be fired after each iteration through the mainloop. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _started A flag which is true from the time reactor.run is called until the time reactor.run returns. This is used to prevent calls to reactor.run on a running reactor. This should be replaced with an explicit state machine. (type: bool)
Instance Variable _registerAsIOThread A flag controlling whether the reactor will register the thread it is running in as the I/O thread when it starts. If True, registration will be done, otherwise it will not be.
Method _reallyStartRunning Method called to transition to the running state. This should happen in the during startup event trigger phase.
Method _moveCallLaterSooner Undocumented
Method _cancelCallLater Undocumented
Method _insertNewDelayedCalls Undocumented
Method _checkProcessArgs Check for valid arguments and environment to spawnProcess.
Method _initThreads Undocumented
Method _initThreadPool Create the threadpool accessible with callFromThread.
Method _stopThreadPool No summary
def __init__(self, eventloop=None): (source)
def _unregisterFDInAsyncio(self, fd): (source)

Compensate for a bug in asyncio where it will not unregister a FD that it cannot handle in the epoll loop. It touches internal asyncio code.

A description of the bug by markrwilliams:

The add_writer method of asyncio event loops isn't atomic because all the Selector classes in the selector module internally record a file object before passing it to the platform's selector implementation. If the platform's selector decides the file object isn't acceptable, the resulting exception doesn't cause the Selector to un-track the file object.

The failing/hanging stdio test goes through the following sequence of events (roughly):

* The first connection.write(intToByte(value)) call hits the asyncio reactor's addWriter method.

* addWriter calls the asyncio loop's add_writer method, which happens to live on _BaseSelectorEventLoop.

* The asyncio loop's add_writer method checks if the file object has been registered before via the selector's get_key method.

* It hasn't, so the KeyError block runs and calls the selector's register method

* Code examples that follow use EpollSelector, but the code flow holds true for any other selector implementation. The selector's register method first calls through to the next register method in the MRO

* That next method is always _BaseSelectorImpl.register which creates a SelectorKey instance for the file object, stores it under the file object's file descriptor, and then returns it.

* Control returns to the concrete selector implementation, which asks the operating system to track the file descriptor using the right API.

* The operating system refuses! An exception is raised that, in this case, the asyncio reactor handles by creating a _ContinuousPolling object to watch the file descriptor.

* The second connection.write(intToByte(value)) call hits the asyncio reactor's addWriter method, which hits the add_writer method. But the loop's selector's get_key method now returns a SelectorKey! Now the asyncio reactor's addWriter method thinks the asyncio loop will watch the file descriptor, even though it won't.

def _readOrWrite(self, selectable, read): (source)
Undocumented
def addReader(self, reader): (source)

I add reader to the set of file descriptors to get read events for.

ParametersreaderAn IReadDescriptor provider that will be checked for read events until it is removed from the reactor with removeReader.
ReturnsNone.
def addWriter(self, writer): (source)

I add writer to the set of file descriptors to get write events for.

ParameterswriterAn IWriteDescriptor provider that will be checked for write events until it is removed from the reactor with removeWriter.
ReturnsNone.
def removeReader(self, reader): (source)

Removes an object previously added with addReader.

ReturnsNone.
def removeWriter(self, writer): (source)

Removes an object previously added with addWriter.

ReturnsNone.
def removeAll(self): (source)

Remove all readers and writers.

Should not remove reactor internal reactor connections (like a waker).

ReturnsA list of IReadDescriptor and IWriteDescriptor providers which were removed.
def getReaders(self): (source)

Return the list of file descriptors currently monitored for input events by the reactor.

Returnsthe list of file descriptors monitored for input events. (type: list of IReadDescriptor)
def getWriters(self): (source)

Return the list file descriptors currently monitored for output events by the reactor.

Returnsthe list of file descriptors monitored for output events. (type: list of IWriteDescriptor)
def getDelayedCalls(self): (source)

Return all the outstanding delayed calls in the system. They are returned in no particular order. This method is not efficient -- it is really only meant for test cases.

ReturnsA list of outstanding delayed calls.
def iterate(self, timeout): (source)

See twisted.internet.interfaces.IReactorCore.iterate.

def run(self, installSignalHandlers=True): (source)

Fire 'startup' System Events, move the reactor to the 'running' state, then run the main loop until it is stopped with stop() or crash().

def stop(self): (source)

See twisted.internet.interfaces.IReactorCore.stop.

def crash(self): (source)

See twisted.internet.interfaces.IReactorCore.crash.

Reset reactor state tracking attributes and re-initialize certain state-transition helpers which were set up in __init__ but later destroyed (through use).

def seconds(self): (source)

Get the current time in seconds.

ReturnsA number-like object of some sort.
def callLater(self, seconds, f, *args, **kwargs): (source)

See twisted.internet.interfaces.IReactorTime.callLater.

def callFromThread(self, f, *args, **kwargs): (source)

Cause a function to be executed by the reactor thread.

Use this method when you want to run a function in the reactor's thread from another thread. Calling callFromThread should wake up the main thread (where reactor.run() is executing) and run the given callable in that thread.

If you're writing a multi-threaded application the callable may need to be thread safe, but this method doesn't require it as such. If you want to call a function in the next mainloop iteration, but you're in the same thread, use callLater with a delay of 0.

API Documentation for Twisted, generated by pydoctor at 2017-06-11 10:59:01.